Bathroom Humidity Sensor Switch for Exhaust Fan: TDHS5-W
The TOPGREENER TDHS5 is a humidity sensor switch that automatically controls the ventilation fan to reduce moisture in the air and condensation on the walls. Prevent mold and mildew caused by excess humidity from forming and stop having to run your bathroom fan all day. The humidity sensor works by detecting moisture in the air to automatically turn the ventilation fan on or off based on the moisture level. Perfect for bathrooms, laundry rooms, spas, or any other room with high humidity levels.
Excess humidity in a room causes the growth of mold, mildew, and fungi. Using this humidity sensor switch for the bathroom fan helps remove excess moisture, thereby preventing mold and bacteria.
The TDHS5 intelligently monitors the moisture levels in the room and efficiently controls the ventilation fan. Keep your home fresh and energy-efficient with the TDHS5 Humidity Sensor Switch!
Operation & Settings
During operation, the fan automatically turns on and off according to the humidity level detected by the sensor. Enter programming mode and change sensor settings with one button. Three different humidity detection levels allow users to program the switch based on the level of moisture in the environment.
Bypass the Sensor
To bypass the humidity sensor, simply press the manual button to turn the fan off while it is running. The humidity sensor will stop detection until the switch is reset. This override feature provides manual control when the fan is not wanted.
Reset the Sensor
To reset the sensor, use the manual button to turn the fan on. It will run for 30 minutes and automatically turn off, and the sensor will resume humidity detection. Any program changes affecting humidity will also reset the sensor.
|Sensor Technolgy||Humidity Sensor|
|Coverage||Humidity Set Point: 45%-80%|
|Time Delay||30 minutes|
|Special Features||Interchangeable Covers|
|Wiring||Single Pole, Neutral Wire Required|
|Compatibility||For Bathroom fans|
|Certifications & Compliance||UL Listed|