PIR Motion Sensor Switch (Neutral Wire Not Required)

(1 customer review)



• Passive Infrared (PIR) sensor detects motion with 180° field of view to automatically turn lights ON/OFF based on the occupancy or vacancy in a room

• Features CDS technology, an automatic ambient light level sensing technology that remembers your ON/OFF behaviors to only turn lights ON at your preferred light level

• Universal wiring design featuring interchangeable hot and load wires to make installation easier; no longer second guess which wire goes where

• Occupancy sensor mode (Auto ON, Auto OFF) and vacancy sensor mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs; adjustable time delay options: 15 sec (Test), 5 min, 10 min, 20 min, 30 min

• 1020 square feet max coverage area, 180-degree field of view; no neutral wire required; 5A, 120VAC @ 60 Hz; 600W incandescent/halogen, 360W LED/CFL, 1/6HP motor rating; #12-14 AWG (copper wire only); clamp-type wiring; flammability UL 94 V2 rating; single-pole only; device dimensions: 2.5″ W x 4.5″ H x 2.5″ D; UL listed; 1-year warranty

Motion Sensor Switch, PIR Sensor with Ambient Light Level

The TOPGREENER TDOS5-JM Motion Sensor Switch automatically turns lights and loads ON and OFF according to the motion detected in the room. An easy replacement for any indoor light switch, the PIR motion sensor automates your lighting to bring your home into the modern age. The programming controls are located under the face cover of the device, and include a sensor range dial, a time delay dial, and a press-button that changes between Occupancy (OCC) and Vacancy (VAC) modes. In occupancy mode, lights are automatically turned ON when you enter a room and automatically turned OFF when the room is vacant. Alternatively, vacancy mode requires the light switch to be turned ON manually, but it will shut OFF automatically after the room is vacant for a preselected amount of time. This time delay can be easily adjusted from 15 seconds (TEST) to 30 minutes.

In addition to occupancy and vacancy modes, this auto light switch can also control the lighting intelligently with CDS technology. The sensor switch is made with built-in ambient light level sensors that will prevent the lights from turning ON when there is enough natural light in the space already. The technology is also capable of learning and adapting to user behavior. If the light switch is activated automatically and the user turns it OFF within 15 seconds, the sensor will remember the light level at which the switch was turned OFF and prevent it from turning ON at that level again. This motion-sensing wall switch is ideal for rooms that you enter with your hands full, such as a residential entryway, laundry room, garage, kitchen, or pantry. The sensor switch will also help you conserve energy by ensuring the light is never left on by mistake. This PIR sensor switch has a 180° field of view and is best suited for spaces up to 1200 square feet. This product is UL listed and includes a one-year warranty.

Pair with a standard or screwless wall plate.

Technical Specifications

Dimensions 2.5″ W x 4.5″ H x 2.5″ D
Power Rating 5A, 120VAC @ 60Hz 600W Incandescent/Halogen 360W CFL/LED
Motor 1/6HP Rated Motor
Special Features 2 modes: OCC and VAC
Poles Single-Pole use only
Wiring No neutral wire required Ground wire is required
Weight 5.4 oz
Dimensions 4.3 × 3 × 2.2 in

1 review for PIR Motion Sensor Switch (Neutral Wire Not Required)

  1. Shane

    This is a great product; works as described.

Add a review

Your email address will not be published. Required fields are marked *

For more product reviews and questions, click the "Buy on Amazon" button to visit Amazon.com

Scroll to Top