Dual Load Motion Sensor Switch, PIR Sensor for Light & Fan, Occupancy & Vacancy Modes
The TOPGREENER TDOS5-JD Motion Sensor Switch is a dual load sensor switch that can control two fixtures simultaneously. This is ideal for controlling a light and fan, but the device can also be used in other dual load applications. An easy replacement for any indoor wall switch, this sensor can automate a light and fan simultaneously based on the motion detected in a room. The programming controls are located under the face cover of the device, and include a sensor range dial, a time delay dial, and a switch that changes between modes. This motion sensor switch features 3 modes: Dual Occupancy (OCCD), Single Occupancy (OCCS), and Dual Vacancy (VACD). In the default, OCCD mode, both connected loads will be automatically turned ON when you enter a room and automatically turned OFF when the room is vacant. OCCS mode operates similarly, but it only applies the feature to the primary load. Alternatively, VACD mode requires both loads to be turned ON manually, but they will shut OFF automatically after the room is vacant for a preselected amount of time. This time delay can be easily adjusted from 15 seconds up to 30 minutes. Both loads can also be turned ON/OFF manually with the press buttons on the face of the switch. The device has a max detection range of 40 ft in front and up to 20 ft on each side. Detection range can be set to 30%, 65%, or 100% of the maximum range. The PIR sensor has a 180° field of view and is best for spaces up to 1200 sq ft. The sensor switch will also help to conserve energy and lower power bills by ensuring the light or fan is never left on by mistake. This motion-sensing wall switch is ideal for rooms that you enter with your hands full, such as an entryway, closet, laundry room, garage, kitchen, or bathroom. This product is UL listed, Title 20 & 24 compliant, and includes a one-year warranty.
|Power Rating||120VAC @ 60Hz, 500W LED/CFL 800W Incandescent/Halogen|
|Motor||1/4HP Rated Motor|
|Special Features||3 modes: OCCD, OCCS, & VACD|
|Poles||Single-Pole use only|
|Wiring||No neutral wire required Ground wire is required|