Ceiling Sensor Low Voltage Power Pack: MPP-24-W
The MPP-24 supplies low voltage power to occupancy sensors and other control devices, switching line voltage in response to signals from the control device. The MPP-24 power pack is attached to existing junction boxes or mounted into fixture wiring trays. Features a bright LED light to indicate the working operation of this power pack. Low voltage wiring should use at least 22-gauge wire. High voltage connections should use at least 14-gauge.
This ceiling sensor power pack converts any line voltage to low voltage in various lighting control systems. The ceiling sensor power pack is designed for the MPC-50L low voltage ceiling sensor and can power up to 6 ceiling sensors per power pack.
Self-contained power supply relay system for low voltage lighting control systems such as low voltage ceiling sensors and low voltage motion sensors. Convert any line voltage to low voltage 120 / 277 VA at 50/60Hz. Features bright LED to indicate functioning operation of the power pack
Connect and power up to 6 low voltage ceiling sensors with one MPP-24. Use Enerlites low voltage occupancy sensors to connect with the MPP-24 ceiling sensor power pack.
|Voltage||120/230/240/277 VAC, 50/60Hz|
|Load Requirements||Ballast: 20amp @120/277VAC|
|Operating Temperature||32 to 131 Fahrenheit (0 to 55 Degrees Celsius)|
|Installation||Supplies power for up to 6 MPC-50L sensors|
|Power Supply||150mA @ 24VDC (with relay connected)|