Smart Z-Wave Dual Relay Switch Module
• Installs behind an existing wall switch to upgrade it into a Z-Wave switch
• Allows you to use original switches and decorative wall plates
• Remotely control your appliances
• Customize scenes and program timed events
• Utilizes Z-Wave Plus and is fully backward compatible with existing Z-Wave devices
• COMPATIBLE HUBS: VeraEdge, VeraPlus, SmartThings, Homeseer, Wink, and Zipato
• Acts as a signal booster to boost network
• 120-277VAC; 10A per relay
• Works with Alexa and Google Assistant with a compatible hub
• Neutral wire required
• Dimensions: L 2.03″ x width 1.72″ depth 0.62″
Availability: In stock
Enerwave Z-Wave Plus Dual Relay Switch Module: ZWN-RSM2-PLUS
Take your home to the next level without changing out your original wall switches. The Enerwave ZWN-RSM2-PLUS Z-Wave Plus Dual Relay Module installs behind standard switches to upgrade them to Z-Wave switches and enable remote control from a mobile device. Get the best of both worlds by keeping your unique switches and adding Z-Wave functionality to those switches. Its slim size fits in most wall boxes and can control two sets of appliances, such as lights, fans, etc.
After installation and inclusion to the Z-Wave network, this dual relay micro switch enables wireless control of lights, fans, and other appliances from any distance using an internet-connected phone or computer. Schedule timed commands or program the module into scenes, groups, and associations for simultaneous control with other Z-Wave devices. Works with Alexa for voice control when used with a compatible hub.
The ZWN-RSM2-PLUS utilizes Z-Wave Plus, which provides longer battery life, faster operation, better RF coverage, and easier setup. It is backward compatible with Z-Wave classic devices and hubs. Z-Wave Plus unifies all connected home devices into an integrated wireless network and helps them communicate with one another.
The Z-Wave module connects to your smart home network via a Z-Wave Plus or classic hub such as VeraEdge, VeraPlus, Vera3, SmartThings, Homeseer, Wink, Fibaro Home Center 2. A Z-Wave Plus-enabled hub is required to achieve the Z-Wave Plus function.
A neutral wire is required for installation. Make sure the hub you are using is compatible and has multi-channel support.
Acts as a Repeater
Once the ZWN-RSM2-PLUS is installed and set up, it will retransmit the RF signal from one device to another until the intended device is reached. In a Z-Wave network, each device is designed to act as a wireless repeater. This ensures that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.
|Range||150 ft. line of sight between controller and closest Z-Wave repeater|
|Acts as a Repeater||Yes|
|Certifications||Z-Wave Plus Certified|
|Z-Wave Frequency||908.42 MHz|
|Dimensions (LxWxH)||2.03″ x 1.72″ x .62″|
|Dimensions||2.9 × 2.5 × 1.7 in|