Dual Load Occupancy & Vacancy Sensor Switch: TDOS5-JD
TOPGREENER dual load occupancy/vacancy PIR sensor switch provides a reliable solution for dual load applications such as lighting and fan combinations. The adjustable modes and settings allow you to customize the sensor to fit your needs. This unit features 3 operating modes (single occupancy, dual occupancy, and vacancy modes). The adjustable settings are time delay, range detection, and ambient light level. It is suited for residential and commercial use.
Dual Occupancy Mode (OCCD)
In this mode, both load connections are automatically turned on when motion is detected and turned off after the time delay has expired. This is especially convenient when entering a room with your hands full, such as a restroom, laundry room, garage, etc.
Single Occupancy Mode (OCCS)
In this mode, the primary load connection is automatically turned on when motion is detected and turned off after the time delay has expired. The secondary load can only be turned on manually and automatically turns off once the time delay expires. Best when used with lighting and fan combinations.
Vacancy Mode (VACD)
In this mode, both loads must be manually turned on by pressing their corresponding buttons. The loads automatically turn off when the time delay has expired. The loads will also turn back on automatically within 30 seconds if motion is detected after the time delay expires. This mode is best used in bedrooms, and meeting rooms.
The load can be set to turn off at15 secs (testing only), 5 mins, 10 mins, 20 mins, and 30 mins. When the PIR motion sensor is triggered, the LED indicator will light up and remain on until the heat signature is no longer present. The time delay countdown will then start and will reset if a new movement is detected.
Detects motion at a maximum distance of40 feet in front of the sensor and up to 20 feet on the sides. The detection range can be set to30%, 65%, or100%of the maximum range. For best results, the sensor should be installed at a height between 4’ to 5’ and away from obstructions such as furniture, or low-hanging decorations.
|Sensor Technolgy||PIR Passive Infrared|
|Coverage||800 sq. ft. at the 180-degree field of view|
|Time Delay||15 Sec to 30 min|
|Special Features||Dual-Relay Controls|
|Wiring||Single Pole, Neutral Wire NOT Required, Ground Wire Required|
|Compatibility||Incandescent 800W, Fluorescent/Ballast 800VA @ 120VAC & 1600VA @ 277VAC|
|Certifications & Compliance||UL Listed|